I beam hoist, Your beam hoist, Good I beam electric chain hoist for you- Dongqi I beam hoist

I Beam Hoist, Your beam Hoist

I beam chain hoist is kind of small and light duty lifting equipment. It is widely used for loading and unloading material in factory, warehouse, processing line. It moves fast and stable, a necessary lifting tool for raising working efficiency and improving working condition.

As a well-known famous electric hoist manufacturer, Dongqi Hoist and Crane supplies I beam chain hoist with excellent quality and factory price.

Frequently asked questions on I beam chain hoist

How to install chain hoist on I-beam steel?

I beam electric chain hoist is an electric chain hoist installed on I-beam steel. Naturally, the chain hoist can be used individually, and can also be used together with electric trolley and lifting cranes. Mostly, the chain hoist needs to be installed on the I-beam steel.

Preparing the electrical hoist, screws and other accessories.
Connect the cable of lifting hoist with control box,
Assemble the trolley with I-beam steel,
Connect cable wired controller. If the lifting hoist is 380V control, wireless control is available.
Install electric hoist on the electric travelling trolley, the electric cable should be connected according to the colors.

After installation, I beam hoist need the loading test before using to ensure hoist.

How to maintain chain hoist reducer?

As for the daily maintenance of the electric chain hoist reducer, the following is very important:

Check and make sure the hoist reducer has no normal sound or noise during working.
Check and make sure the hoist reducer box has crack or is out of shape.
Check and make sure there is no oil leak on the reducer box cover or at bottom.
Check and make sure the screws are not lose or have no problems.
Reducer should be checked in certain time, and adding lubricant oil.

The maintenance of the electrical hoist reducer has to perform daily to ensure the safety and prolong the service-life of lifting hoists.

What to do if electric motor is too hot?

If electric motor is too hot, it means something is wrong. The following procedure helps you to get your motor back to normal:

Make sure the electric hoist is not overloaded. Overload can cause the motor heating. Long time overload can burn down the motor.
Check and make sure the motor shaft is not damaged and working normally according to standard working duty. Motor with too narrow braking gap will produce powerful friction force. Frictional heating can increase the extra load, which reduces the rotating speed of motor.
Check and make sure the electric current is normal. The increased electric current also can cause the heating of the motor. When electric current increases, it is necessary to stop working and adjust the brake gap.